About Us
Peeling trim, dingy walls, or chalky siding don’t just look bad, they let moisture in and drive repair costs up. If you see bare spots, hairline cracks, or chalk on your hand, we step in fast with tight prep and durable finishes as your interior house painter, exterior house painter, and roof painter in Dunedin.
Our crew lives and works in Dunedin, brings years of hands-on work, and we stick to a clear prep system that lasts. We wash, scrape, sand, repair, caulk, spot prime or full prime, then apply two finish coats at the right temperature range with the right tools, and we plan around Dunedin weather so coatings cure as they should.
You get a clear written scope, neat daily cleanup, steady updates, and work that starts on time and finishes on time, plus a strong warranty that we stand behind. We help with colour, samples, and sheen choices, we carry full insurance and workers compensation, and we show up when we say we will.
Interior work covers drywall repair, sanding, caulking, priming, and two smooth coats on walls, ceilings, trim, and cabinets with low odour paints so rooms look sharp and you get back to normal fast, while exterior work includes pressure washing, scraping, sanding, spot prime, full caulk, and the right application method with brush, roll, or spray and back roll so the paint film builds right and seals out weather. As your roof painter we clean and treat rust on metal, coat tile or shingles where it makes sense, test adhesion, and use safety harnesses, and we guide you on timing such as repainting exteriors every five to ten years and busy interiors every three to five years or sooner if you see peeling, hairline cracks, water stains, or chalky colour, because skipping prep or painting in the wrong weather leads to early peeling, blistering, mildew, and costly wood or drywall repair.
Our roof painter work focuses on safe access, rust treatment, and reflective or waterproof roof coatings for metal or tile roofs to cut heat and extend roof life. We never paint over mildew, skip primer on glossy or chalky surfaces, or paint in direct midday sun because those shortcuts cause flashing, blistering, and early failure.
